KraftMaid Construction Service Nationwide

Why Los Angeles Homeowners Choose KraftMaid Construction

Elmstead Remodeling provides independent KraftMaid construction service across Los Angeles, from Kraftmaid repair in Los Angeles and cabinet installation to refacing and full kitchen remodels built around KraftMaid cabinetry. We work on the Vantage, Choice, Insight, and Serena lines, and we know how these cabinets behave in LA’s dry air, older homes, and sunny interiors. We are not an authorized KraftMaid dealer or warranty provider, but we are the crew Los Angeles families call when their KraftMaid cabinets need a careful, honest repair or a properly shimmed installation. Call (949) 850-9896 for a free estimate.

Call (949) 850-9896

Our team has installed and serviced KraftMaid cabinetry across Los Angeles County for years, from Kraftmaid service in Glendale and Hollywood bungalows with original 1920s footprints to new build-outs in the San Fernando Valley. We have worked through the brand’s catalog of door styles, finishes, and storage systems on real job sites, which means we know how their boxes shim, where their hinges and drawer glides wear, and how their finishes behave in the local climate. No guesswork when we show up.

This page tells you exactly which KraftMaid lines show up in LA homes and how the city’s dry air, older housing stock, and temperature swings drive the specific failures we fix, so you can diagnose your cabinets before you call anyone.

Key Takeaways

• We service all four major KraftMaid lines: Vantage, Choice, Insight, and Serena.
• Cabinet installation in Los Angeles runs $4,720 to $15,340; full kitchen remodels with KraftMaid cabinetry run $16,520 to $53,100.
• Most KraftMaid drawer and door failures are repairable without replacing the cabinet boxes.
• We use OEM KraftMaid parts when available and high-quality aftermarket equivalents when OEM is backordered or discontinued.
• Written price before any work starts, always. No estimates that grow after the crew arrives.

Why Trust Elmstead Remodeling for Your KraftMaid Construction?

Graham Stein, our owner, grew up in Silver Lake back when the reservoir was still fenced off and the neighborhood felt like a quieter version of itself. He learned framing, finish work, and project sequencing at Los Angeles Trade-Technical College on South Grand Avenue, where instructors expected you to read a set of plans before you picked up a tool. That training shows up in how we approach KraftMaid work. We do not slap cabinets on a wall and call it a day. We check the floor for level before the first box goes in, because in older Los Angeles homes with slab movement or past water damage, a 1/4-inch dip in the floor becomes a cracked cabinet bottom and misaligned doors six months later.

What Graham is known for locally is the kind of kitchen and bathroom work where the tile lines up with the window casing and the cabinet doors close the same way ten years later. That matters with KraftMaid. These cabinets are built to spec, but they demand careful installation. Hinge alignment, drawer glide spacing, box shimming, and moisture clearance above dishwashers all determine whether a KraftMaid kitchen still functions smoothly in year eight.

We are not affiliated with or authorized by KraftMaid, and we say that up front because it matters. What we offer is something different: years of hands-on KraftMaid service experience in Los Angeles, plus the Cedarwell Care Promise on every job. Shoe covers and drop cloths inside the house. A written price before any work starts. A photo of the clean-up before the crew leaves. Quiet tools during family rest hours where possible. Pet-safe product choices where available. And a 365-Day Done Right Promise: if it is not done right, we make it right.

Common KraftMaid Construction Problems We Fix in Los Angeles

KraftMaid cabinets are well built, but Los Angeles has a way of finding their weak points. Here is what we see most often when we walk into an LA home with failing KraftMaid cabinetry.

• Blum drawer glides seizing or sagging on Vantage and Choice lines. KraftMaid’s Vantage and Choice series use Blum undermount glides, which are smooth when new but wear under years of heavy use. In kitchens where drawers are loaded with cast-iron cookware, bulk pantry staples, or stacks of plates, the nylon rollers inside the glide degrade and the ball bearings lose their track. We see this constantly in Los Angeles homes where the kitchen is the real workhorse of the house. Symptoms include drawers that stick mid-pull, sag slightly when open, or refuse to close flush. The fix is usually new glides, not new cabinets.
• Thermofoil delamination near heat and steam sources. KraftMaid thermofoil doors and drawer fronts peel where heat and moisture cycle constantly: next to the dishwasher, above the oven, under the sink. Los Angeles’s dry air and wide temperature swings between day and night make the thermofoil edge lift faster than it would in, say, a more humid climate. Once the edge lifts, steam gets underneath and the peeling accelerates. A door with a lifted thermofoil edge near the dishwasher is the most common thermofoil failure we see in Hollywood, Koreatown, and the Westside.
• Paint and stain finish wear on hinge-side door edges. Inset and raised-panel KraftMaid doors wear first on the hinge side and around the pulls. This is mechanical wear, not a material defect. Cabinets on south- and west-facing walls in Los Angeles get hammered by direct sun through windows, which accelerates finish fading and makes chips more visible. The finish itself is fine; the location of the cabinet is the problem. We can color-match and reface individual doors, which saves a lot of money versus replacing an entire run.
• Swollen particleboard or MDF box components on older floors. KraftMaid cabinet boxes are made from furniture-grade particleboard or MDF, which is stable in a climate-controlled environment. But in older Los Angeles homes built in the 1920s through the 1970s, slabs shift and past leaks leave moisture in the floor. A base cabinet sitting on an uneven or moisture-prone slab floor will eventually swell at the bottom, crack at the corners, and throw the doors out of square. We see this often in Silver Lake bungalows, Los Feliz Craftsman homes, and postwar Valley tract houses.
• Misaligned doors from poor initial installation or settling. Sometimes the problem is not the cabinet at all. It is the install. Cabinets set on an unlevel floor or shimmed incorrectly will slowly drift out of alignment. Doors that once closed flush start catching, gaps open up, and the whole run looks sloppy. In Los Angeles, where many kitchens were renovated in the early 2000s during the housing boom, we regularly find KraftMaid cabinets that look ten years older than they are because the original install was rushed.

KraftMaid Parts & Our Repair-vs-Replace Approach

We source OEM KraftMaid hardware, hinges, drawer glides, and shelf pins, when available, because they match the existing drilling patterns and function exactly as the manufacturer intended. But OEM parts are not always available. KraftMaid has changed suppliers and lineups over the years, and older Vantage or Choice components are sometimes discontinued or backordered for months. When that happens, we use high-quality aftermarket glides and soft-close hinges that meet or exceed the original specs. Blum and Salice both make excellent aftermarket undermount glides that fit KraftMaid’s standard 1/2-inch drawer-bottom clearance, and we stock several of those in our local inventory for fast turnaround on Kraftmaid service in Long Beach and throughout Los Angeles.

The repair-versus-replace decision is honest and structural. If a KraftMaid box is square, dry, and solid, and only the fronts or hardware are failing, we repair or reface. You keep the boxes, save thousands, and the kitchen is out of service for days instead of weeks. If the cabinet frame is swollen, cracked, or out of square, we recommend replacement, because patching a failing box will not hold up in a working kitchen. No amount of shimming or glue fixes a particleboard box that has been soaking up moisture for five years. Call (949) 850-9896 and we will tell you which category your cabinets fall into during a free estimate.

Our KraftMaid Service Process – Step by Step

Every KraftMaid job in Anaheim Kraftmaid service and throughout Los Angeles follows the same sequence, whether it is a single hinge replacement or a full kitchen remodel built around KraftMaid cabinetry.

1. 1
   Diagnosis. We inspect every cabinet box, door, hinge, glide, and finish. We check the floor with a laser level. We look for moisture staining, slab movement, and sun exposure patterns. For KraftMaid specifically, we check the hinge-side drilling, the glide mounting brackets, and the door-to-box clearance on every opening. You get a written diagnosis and a written price before any work starts.
2. 2
   Repair or installation. If we are repairing, we remove the affected doors and glides, source the correct parts, and reassemble to spec. If we are installing new KraftMaid cabinets, we set the base run first, shim to level, secure to studs, then hang the uppers. We leave the proper clearance above dishwashers and ranges, and we adjust every hinge and glide so doors close flush and drawers slide without effort.
3. 3
   Test and adjust. We open and close every door and drawer ten times. We load drawers with weight to simulate real use. We run a level across the entire run. If a door catches or a drawer sags, we fix it before we leave. On KraftMaid soft-close hardware, we check that every closer engages without slamming or bouncing.
4. 4
   Clean-up and documentation. We vacuum, wipe down every surface, and take a photo of the clean-up before the crew leaves. That photo is yours, and it is proof the home was left right. Then we walk you through the work and hand you any warranty information for the parts we installed. The 365-Day Done Right Promise covers the completed project from that moment forward.

KraftMaid Products We Service & Install in Los Angeles

We service and install the four major KraftMaid lines you will find in Los Angeles homes: Vantage, the brand’s premium full-access line with frameless construction and soft-close hardware; Choice, the mid-range line with face-frame construction and the widest selection of door styles; Insight, the entry-level line with thermofoil finishes and standard hardware; and Serena, KraftMaid’s recent line with a cleaner, more modern aesthetic. We stock common shelf pins, hinge plates, and glide sets locally in Los Angeles, and we can order door styles and finishes from KraftMaid’s current catalog when full replacement fronts are needed.

We Also Service These Brands

KraftMaid is our focus for this page, but we are multi-brand in practice. We install and service countertops from Cambria and Silestone, and fixtures from Kohler and Toto. If your kitchen or bath has mixed brands, we handle the whole project without juggling multiple contractors.

KraftMaid Construction Pricing in Los Angeles

Book Your KraftMaid Service in Los Angeles, CA

If your KraftMaid cabinets need repair, refacing, or a full installation, call us at (949) 850-9896. You will talk to a live person, not a voicemail box. We will schedule a free estimate, walk through your kitchen, and give you a written price before any work starts. Graham Stein and the Elmstead Remodeling team serve families all across Los Angeles, and we would be glad to look at yours.

Written by Graham Stein, Owner at Elmstead Remodeling, serving Los Angeles since 2005. He has been working on homes across Los Angeles for going on two decades, learning the fundamentals at Los Angeles Trade-Technical College and building a reputation for the details that do not show up in a photo but matter every morning.