Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Bathroom Remodeling: The Los Angeles Owner’s Guide
KraftMaid bathroom remodeling in Los Angeles typically costs between $10,620 and $33,040 for a full remodel, with cabinet-specific repair and replacement work often landing between $945 and $3,540 depending on the part. Elmstead Remodeling stocks KraftMaid-compatible cabinet hardware, hinges, drawer guides, and door components, and most swap-outs take a single visit. You’ll usually notice the failure first as a cabinet door that won’t stay closed, a drawer that catches half-open, or a hinge that creaks even after tightening. These are the kinds of failures that start small and get worse as the humidity of a Los Angeles bathroom works its way into the cabinet box.
We’re an independent remodeling contractor, not affiliated with KraftMaid. What that means for you is we work on the cabinet in place rather than routing you through a warranty phone tree. We name the part, we show you the price in writing before we touch anything, and we leave the bathroom clean enough that your kids can use it the same evening.
Which KraftMaid Models This Applies To
KraftMaid has produced bathroom vanity lines under several series names over the past two decades, and the hardware specs are not universal across all of them. The Venicia line, which KraftMaid ran for years as a frameless, full-overlay cabinet, uses a different hinge cup diameter than the standard framed cabinet lines. We have seen Los Angeles homeowners order a generic 35mm soft-close hinge online only to find it won’t seat in the door. That’s the compatibility gotcha that costs people a second trip to the hardware store.
The way to identify your part is to remove the failed hinge or guide and look for a stamp on the metal. KraftMaid hardware from the “All-Ply” and “solid hardwood door” lines typically carries a part number that starts with “KM” printed on the mounting plate or the underside of the guide rail. If the stamp is worn off, measure the hinge cup diameter (35mm is the most common for frameless; 26mm appears on some framed lines) and the drawer guide’s side clearance. When replacement calls for OEM, we order KraftMaid-specified hardware so the door reveals match. When a quality aftermarket equivalent is equal or better, such as Blum soft-close hinges that outlast the original by years in damp bathrooms, we tell you before we install it and explain why we made that call.
Styles & brands we work with
Signs Your KraftMaid Bathroom Remodeling Is Failing
- Doors that drift open or won’t close fully. The spring inside a soft-close hinge has lost tension. In a Los Angeles bathroom where steam and heat cycle daily, hinge springs fail faster than they do in a dry hallway closet. The spring is inside the hinge cup and isn’t repairable, only replaceable.
- A drawer that sags or binds halfway. The plastic roller or nylon bearing on the drawer guide has worn flat on one side. KraftMaid guides are side-mounted, and once the roller wears, the drawer starts shaving against the cabinet face with every open and close.
- Gray dust under a cabinet door hinge. That is metal-on-metal wear. The hinge plate has loosened from the door or the frame, and every open and close is grinding the screw threads. Tightening helps temporarily, but the screw holes are stripped, and the hinge needs a new pair of screws or a plate.
- A vanity door that has dropped a quarter inch and scrapes the shelf below. This is a hinge mounting failure, not a hinge failure. The particleboard under the veneer has softened from the bathroom’s humidity, and the screw no longer bites. The fix is to remove the door, pack and redrill the hole, and reset the door. In more severe cases on older KraftMaid boxes we have replaced the cabinet end panel.
- Peeling veneer at the bottom of a vanity door. In LA’s coastal microclimates, bathroom vanities take a lot of wet-hand contact. Once the edge banding lifts, moisture is riding straight into the substrate. Left alone, the door swells and can no longer be aligned by any hinge adjustment.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For KraftMaid bathroom cabinet part replacement in Los Angeles, a hinge or drawer guide swap runs $945 to $3,540 as a single-trip repair, with the exact number driven by how many doors and drawers you are correcting, whether the part is a stock size or special order, and how much finish matching the job requires. A full bathroom remodel with KraftMaid vanities, countertop, fixtures, and tile runs $10,620 to $33,040.
We give you a written price before any work starts. That price includes the part, the labor, the shoe covers, the drop cloths, and a photo of the clean-up before the crew leaves. If the part needs to be ordered from KraftMaid, we tell you the lead time before you agree to anything. Nothing gets added after the crew arrives. The 365-Day Done Right Promise covers the repair: if the door drifts or the drawer binds again within a year, we come back and make it right.
DIY or Call Us?
There are two things an owner can safely check before calling. First, tighten the hinge screws with a hand screwdriver, not a drill. If the door realigns, you’ve bought yourself time. Second, look at the hinge cup and see whether the spring arm is cracked. If it is, no tightening will fix it, and replacing a soft-close hinge in a KraftMaid door requires shimming the door back to its original reveal, which is where DIY attempts usually leave a gap that was not there before.
Drawer guide replacement is the one we’d skip doing yourself. KraftMaid guides are side-mounted, but older boxes were set with plastic brackets that snap when the new guide is forced. If you’ve never reset cabinet hardware, a $25 bracket snapping is a frustrating Saturday. We carry commonly needed KraftMaid hinge sizes and guide sets on the truck, and we answer the phone when you call. Graham Stein has been working on Los Angeles homes for going on two decades, and the fix that looks simple on a YouTube video is often the one that burns a weekend. Call (949) 850-9896 and we will give you an honest read on whether it is a quick swap or something more involved.
FAQs
In a Los Angeles bathroom, original KraftMaid hinges and drawer guides typically last 10 to 15 years before the hardware starts to show fatigue, with coastal humidity and steam cycles shortening that range. Soft-close hinge springs usually fail first. Call (949) 850-9896 for an exact look at what is failing on your cabinets.
No, the soft-close mechanism is sealed inside the hinge cup and cannot be lubricated or re-sprung. The hinge needs to be replaced, and the good news is we typically carry the correct KraftMaid-compatible sizes on the truck. Call (949) 850-9896 and we can confirm what size is in your vanity over the phone.
A single-door hinge replacement or drawer guide swap usually takes 45 to 90 minutes on site, including aligning the door back to its original reveal. If multiple doors and drawers need attention, the visit may run half a day, but the written price covers the full scope before we start. Call (949) 850-9896 for a free estimate.
We stock the most common KraftMaid hinge sizes, drawer guides, and mounting plates on the truck. Less common sizes and cabinet box components are special-ordered, and we give you the lead time in writing before any work is scheduled. Call (949) 850-9896 and we will identify the part and tell you what is on hand versus what needs to be ordered.
If you are standing in a bathroom with a door hanging crooked and a drawer that will not close, call (949) 850-9896. We will identify the part, give you a written price, and schedule a time that works around your family’s routine. You will know the price before we start, and you will have a photo of a clean bathroom before we leave.
Written by Graham Stein, Owner, Elmstead Remodeling at Elmstead Remodeling, serving Los Angeles and nearby areas.
