An open living room and dining area after a whole-home remodel

ViewLux Fence Installation Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansProudly serving local communities 21+ years
A home office with a built-in desk and shelves
An open living space after a whole-home remodel
A remodeled living room with built-in shelves around the fireplace
A whole-home remodel with the living, dining and kitchen areas opened up
A remodeled family room with new windows and a window seat
A garage converted into a guest room and home office
New painted shaker cabinets with an organized deep drawer
A remodeled hall bathroom with patterned floor tile and painted walls
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

ViewLux Fence Installation: The Los Angeles Owner’s Guide

ViewLux fence installation in Los Angeles typically runs $4,130 to $10,620 for a full replacement, including materials, labor, and disposal of the old fence. That range covers most residential properties between 50 and 80 linear feet, with the final number depending on your site access, slope, and whether we’re matching an existing ViewLux series or starting fresh. Most owners discover they need professional installation after a section starts leaning after winter rains, or when a gate stops latching because the post shifted.

Call (949) 850-9896

We stock ViewLux-compatible post caps, gate hardware, and rail brackets on our trucks, and we know which aftermarket components actually hold up in Los Angeles sun and Santa Ana wind. Elmstead Remodeling is an independent service provider, not affiliated with ViewLux, but we work with their product lines regularly because so many LA homes already have them installed.

Which ViewLux Models This Applies To

A built-in window seat in a bay window

ViewLux fence systems fall into a few distinct series, and the install details differ enough that matching parts matters. The classic post-and-rail vinyl lines use 2-inch or 2.5-inch square posts with routed rails that slide into pre-cut channels. The privacy series uses interlocking tongue-and-groove pickets that mount from the inside, which means the “finished” side faces out and the rail side faces your yard. That orientation matters when you’re replacing a single panel and want it to look identical to the rest of the run.

Before you buy anything, look for a small manufacturer stamp on the inside of a post cap or the bottom rail. It will usually list the series name and sometimes a date code. If the stamp is gone, measure the post width and the wall thickness of the picket. ViewLux products generally have a picket wall between 0.045 and 0.065 inches, which is thinner than some budget brands but holds up well in mild Southern California climates. We match those specs rather than guessing. For parts that are no longer in production, we source quality aftermarket equivalents that match the color, profile, and UV stabilizer package, so a repair doesn’t show as a patch job.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Signs Your ViewLux Fence Installation Is Failing

  • Posts leaning more than a few degrees. This usually means the original installer set posts in shallow concrete or skipped the gravel base at the bottom of the hole. In Los Angeles, the freeze-thaw cycle isn’t the issue; it’s expansive clay soil in neighborhoods like Valley Village and Westchester that heaves posts over time.
  • Rails sagging between posts. ViewLux rails are rated for specific spans, typically 6 to 8 feet. When an installer stretches a section to 10 feet to save a post, the rail bows, and eventually the routed end cracks at the post face.
  • Gate sagging or dragging on the latch side. The hinge side post takes the full weight of the gate plus wind load. Without a proper kicker brace or a post set below the 24-inch depth, that post works loose within a few seasons.
  • Pickets popping out of the bottom rail. This is a common failure in Los Angeles because of the heat. Vinyl expands and contracts with temperature swings, and if the installer didn’t leave proper expansion gaps, pickets bind and pop. We allow for expansion on every ViewLux job we touch.
  • Discoloration that won’t wash off. Not a structural problem, but it tells you the fence is near the end of its cosmetic life. Some ViewLux lines carry a fade warranty, but if the original purchase paperwork is long gone and the homeowner before you bought the fence, there’s not much to claim.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A dining nook with a built-in banquette

For a full ViewLux-style fence installation in Los Angeles, you’re looking at $4,130 on the lower end for a straightforward 50-foot run with good access and flat ground, up to $10,620 for a larger or more complicated property. The biggest drivers are linear footage, post count, soil conditions, and whether the old fence is set in concrete that has to be jackhammered out. Average cost per linear foot works out to roughly $82 to $132 installed in LA, which is a little higher than the Inland Empire because of labor rates and the extra time required to drill through rocky soil in areas like Echo Park and Highland Park.

Every quote we write includes the line items: ViewLux-compatible posts, rails, pickets, post caps, gate hardware, concrete for footings, disposal of the old fence material, and a layout check before we dig. No allowances, no “materials to be determined.” The written price is the price. If the fence is not done right, the 365-Day Done Right Promise means we come back and make it right.

Here’s how a typical Los Angeles ViewLux fence install breaks down:

  • 50 linear feet, flat lot, good soil: $4,130 – $5,900
  • 75 linear feet, one gate, moderate slope: $5,900 – $8,260
  • 100+ linear feet, two gates, rocky soil or hard access: $8,260 – $10,620
  • Single-post reset (not full replacement): $470 – $825 per post, plus materials if the post is cracked
  • Gate replacement with new hardware and kicker brace: $825 – $2,360, depending on width and finish

DIY or Call Us?

Replacing a cracked post cap or straightening a loose gate latch is something a homeowner can handle in an afternoon with basic tools. Setting a new post, especially in Los Angeles clay, is where DIY fence work goes sideways. The concrete has to extend below the loose topsoil into stable ground, the post needs to be plumb in two directions while the concrete sets, and the gate has to be hung so it doesn’t drag in six months. We get calls every year from homeowners who dug a hole, set a post, and watched it lean after the first heavy rain because the footing wasn’t deep enough or the concrete mix was too wet.

If you’re not sure whether your failing section is a simple repair or a full replacement, call us at (949) 850-9896. We’ll ask a few questions about what you’re seeing, give you an honest read over the phone, and if you want, schedule a visit to measure and quote it in writing.

FAQs

A remodeled primary suite with built-in wardrobes and a window seat

Getting started with Elmstead

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Find your local team

Each location is independently owned and works to the same written standard. Enter your ZIP code to reach yours.

A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · Written quotes before work starts response · free estimates
Call (949) 850-9896
Areas We Serve

Request a Free Estimate

Tell us what you need - Elmstead Remodeling responds fast. No obligation.

When you send us your details, you acknowledge our Privacy Policy and agree to be contacted by call, text, or email regarding your project, including by the service partners who may complete the work.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch