Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Kitchen Remodeling: The Los Angeles Owner’s Guide
Elmstead Remodeling installs and services ActiveYards kitchen systems throughout Los Angeles, with most complete kitchen remodels running between $16,520 and $53,100 depending on the size of the space, the ActiveYards components you’re replacing, and whether we’re refreshing one section or rebuilding the room. The typical way a homeowner lands here is a cabinet door that no longer closes flush, a pull-out that catches mid-track, or a finish that has started lifting at the edges after years of daily use. We match your existing ActiveYards configuration and give you the written price before any work starts.
Key Takeaways
- ActiveYards components are modular, so we can often replace a single failed section rather than an entire run.
- Installed pricing in Los Angeles for a full kitchen remodel runs $16,520 to $53,100; partial component replacement is typically lower.
- We stock common ActiveYards-compatible hardware on the truck and can source series-specific pieces quickly through our local supply network.
- Every job includes the Cedarwell Care Promise: shoe covers, drop cloths, a written price up front, and a photo of the clean-up before we leave.
- The 365-Day Done Right Promise covers the completed work. If something isn’t right, we come back and make it right.
Which ActiveYards Models This Applies To
ActiveYards has run several cabinet and storage series over the years, and the compatibility questions usually come down to measurements rather than model names. The critical number is the drawer box width and depth, measured from the inside face of the cabinet opening, not the face frame. Los Angeles homes we have worked in run the full range, but the majority of ActiveYards kitchens we service in the LA basin were installed between the mid-2000s and the early 2020s, which lines up with two major hardware generations: the older side-mount glides and the newer undermount soft-close rails. If your pull-out drawer has a sticker on the inside edge showing a series code or a date stamp, that helps us identify what you have without guesswork.
OEM ActiveYards parts are worth the cost when the piece is structural: a drawer box, a face frame, a hinge plate that anchors into the cabinet itself. For hardware like glides and dampers, we often recommend quality aftermarket equivalents that match the spec and hold up to the same daily use, because the manufacturers that supply ActiveYards also supply the broader cabinet industry under other labels. One compatibility gotcha we see regularly in Los Angeles: coastal air near the 405 corridor and up through the Palisades accelerates corrosion on older metal glides and shelf pins, and once corrosion starts, the soft-close mechanism tends to bind. If your home sits within a few miles of the coast, we factor that in when selecting replacement hardware, because the standard zinc-plated parts will not last the same way they do in Burbank or Pasadena.
Styles & brands we work with
Signs Your ActiveYards Kitchen Remodeling Is Failing
- Drawer opens with extra effort or catches partway: This is almost always a glide that has worn or bent, often from years of carrying heavy cookware. In kitchens near the coast, we also see salt moisture quietly corroding the bearings until the motion gets rough.
- Cabinet door hangs lower on one side or will not stay closed: The hinge has lost tension or the mounting screws have begun pulling out of the cabinet face. Left alone, a sagging door puts uneven stress on the adjacent doors and starts wearing those hinges too.
- Soft-close stops working or the drawer slams: The damper inside the glide or hinge has failed internally. It is a small cylinder that does the quiet work, and when it goes, the whole motion changes.
- Finish lifting, peeling, or bubbling at the edges of door fronts: Southern California sun and dry air take a toll on cabinet finishes over time, especially on doors that face a window or get direct afternoon light. The damage is often cosmetic but spreads once moisture gets under the finish.
- Pull-out or roll-out tray shifts side to side when extended: The drawer runners are no longer seated or the base has begun sagging from weight. This one is common in old ActiveYards pull-out pantry units where the original design carried more load than the frame could support over a decade.
Replacement Cost & What’s Included
For parts replacement and targeted work on an ActiveYards kitchen in Los Angeles, you are usually looking at a smaller number than the full-remodel range. Cabinet installation alone runs $4,720 to $15,340 in LA, and that figure covers the labor to pull damaged sections, install replacement components or new cabinets, level everything, and haul away the old material. Countertop installation runs $2,360 to $7,670. Most ActiveYards parts-focused jobs we do sit at the lower end because the scope is surgical: replace the drawer glides, install new hinges, re-laminate a door front, or rebuild one pull-out unit.
A full kitchen remodel on an ActiveYards home, where we are replacing the cabinet run, the counters, the backsplash, and the fixtures, runs $16,520 to $53,100 in Los Angeles. What moves the number is the size of the kitchen, the countertop material you choose, whether the cabinet boxes themselves need replacing or just the doors and fronts, and how much plumbing or electrical work is involved. Every quote includes the written price before work starts, drop cloths and shoe covers on every visit, and a photo of the clean-up before the crew leaves. The 365-Day Done Right Promise covers everything we install, so if a hinge binds or a drawer rail fails within a year, we come back and fix it.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some ActiveYards maintenance is safe to handle yourself. Tightening a loose hinge screw, adjusting a door with a screwdriver, or cleaning built-up residue from a glide track are all straightforward and worth doing before calling anyone. What we caution against is trying to rebuild a drawer box, re-laminate a door front, or replace undermount glides on your own. These pieces are precise, and a misaligned install will wear out the new part faster than the old one failed. If you have older side-mount glides with metal tabs, those carry tension and can pinch fingers during removal.
Graham Stein has been working on Los Angeles kitchens for going on two decades, and the call we get most often after a DIY attempt is a drawer that now pulls out crooked or a soft-close that works only on one side. Matching the right glide to the right drawer box is the kind of thing that looks simple until the drawer will not seat. If you are unsure whether your ActiveYards part can be rehabbed or needs replacement, call (949) 850-9896 and describe what you are seeing. We will tell you over the phone whether it is a five-minute fix or a job for the crew.
FAQs
In a typical Los Angeles home, ActiveYards cabinet hardware lasts 10 to 18 years, with glides and soft-close dampers wearing out before the cabinet boxes or door fronts. Homes closer to the coast tend to see hardware fail on the earlier side of that range because of salt air corrosion, while inland kitchens in the Valley and beyond usually get the longer end of the timeline. If your kitchen was installed in the mid-2000s and the drawers are starting to catch, you are right on schedule for a hardware refresh. Call (949) 850-9896 to have us take a look and give you a written price for what actually needs replacing.
Yes, in many cases the part can be repaired rather than swapped out, especially when the issue is a loose hinge, a misaligned drawer face, or a glide that needs cleaning and re-seating. The exception is internal dampers and worn bearing slides, which are sealed units; once those fail, the repair is a replacement. We will always tell you if a repair is the honest option, because we would rather keep the job small than sell you parts you do not need. For an exact recommendation, call (949) 850-9896 and describe the symptom you are seeing.
Most single-part replacements, like a drawer glide set or a hinge pack, take under two hours once we are on site. Larger scopes, such as rebuilding a pull-out pantry or replacing multiple cabinet doors, may run a full day or extend across two visits depending on how many sections are involved. We schedule around your family’s rhythm, which means quiet tools during nap and school hours wherever possible and a written timeframe before the crew arrives. Call (949) 850-9896 and we will give you a realistic window for your specific parts list.
We carry common ActiveYards-compatible hardware on the truck, including soft-close glides, hinge packs, pull-out runners, and the fasteners that tend to loosen over time. Series-specific pieces, like a particular drawer box profile or a matched door front, usually need to be sourced through our local supply network, which we can often do within a few business days in Los Angeles. For the most accurate answer on your specific model, call (949) 850-9896 with the measurements or series code from your cabinet, and we will confirm what we can bring on the first visit.
Contact Elmstead Remodeling
If your ActiveYards kitchen has a drawer that catches, a door that sags, or a soft-close that stopped being soft, we are ready to help. Every job starts with the written scope and the written price, so there is no guesswork and no number that changes after the crew arrives. Our line is answered by a live person 24/7, and we work across Los Angeles, from Silver Lake and Echo Park out to the Valley and down through the beach communities. Call (949) 850-9896 to schedule your free estimate, and we will send a background-checked, uniformed technician to measure, assess, and give you the number in writing.
Written by Graham Stein, Owner, Elmstead Remodeling at Elmstead Remodeling, serving Los Angeles and nearby areas.
