Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Fence Installation: The Los Angeles Owner’s Guide
We install ActiveYards fence systems across Los Angeles, with most full fence installations running between $4,130 and $10,620 depending on linear footage, gate hardware, and whether your yard needs new posts or just panel replacement. We stock ActiveYards-compatible posts, rails, pickets, and gate hardware on our trucks, so a failed section usually gets swapped the same visit. Most Los Angeles homeowners discover a failing fence installation one of two ways: a gate that starts dragging against the concrete after a rain, or a section that leans after the Santa Ana winds push through. If you’re reading this, you’ve probably already noticed one of those.
We’re an independent remodeling contractor, not affiliated with ActiveYards itself, but we’ve worked with their aluminum and vinyl systems long enough to know which parts fail first and which aftermarket equivalents hold up in Southern California’s dry heat and coastal salt air.
Which ActiveYards Models This Applies To
ActiveYards splits its residential fencing into a few main lines, and the parts are not always interchangeable across them. The aluminum lines include the Madison, Bristol, and Newport series, while vinyl comes in Chesterfield, Carrington, and Somerset profiles. Each has its own post dimensions, rail brackets, and picket spacing, so a Madison bracket will not seat correctly on a Bristol post. That’s the most common compatibility mistake we see when a homeowner orders parts online without checking the label.
The fastest way to identify your ActiveYards model is to look for the stamped code on the inside of the gate post or on the bottom rail, usually a two-letter prefix followed by digits. If that’s worn off, measure the post width: most ActiveYards residential lines use 2-inch or 2.5-inch square posts, and that measurement alone narrows things down fast. For replacement parts, ActiveYards OEM components are well made, but we’ve found quality aftermarket aluminum hinges and latch assemblies that match factory specs at roughly 30 to 40 percent less. We carry both, and we’ll show you the price difference before the work starts.
One Southern California specific note: powder-coated aluminum holds up well in Los Angeles, but the factory clear coat on some ActiveYards vinyl lines can haze or take on a chalky texture after ten-plus years of direct sun. That’s true of most vinyl fencing, not just ActiveYards, but it’s worth knowing if you’re deciding between a partial repair and a full replacement.
We also stock parts for other named brands we install: KraftMaid cabinetry components, Cambria and Silestone countertop materials, and the hardware that goes with them. If you’re fixing more than the fence line, we can price that in the same written scope.
Styles & brands we work with
Signs Your ActiveYards Fence Installation Is Failing
- Gate drags or won’t latch. In Los Angeles clay soil, post footings shift with seasonal moisture changes. A gate that clears the ground in October drags by February. The fix is usually re-shimming the gate frame or resetting the hinge post in a deeper concrete footing.
- Section leans noticeably, especially after wind. Santa Ana gusts test every post. A lean usually means the post below grade has rotted, cracked, or its concrete collar has separated. Replacing one post early is a fraction of replacing a downed section.
- Pickets rattle or have come loose from the bottom rail. This often traces back to the factory self-tapping screws backing out over years of thermal expansion. Re-securing with stainless fasteners is a quick same-day fix.
- White or gray chalky film on vinyl surfaces. UV degradation of the top coat. Cosmetic at first, but it signals the material is becoming brittle. Aggressive scrubbing speeds the breakdown; we usually recommend a gentle wash and a section replacement when flexing starts.
- Rust stains bleeding from aluminum joints. Even powder-coated aluminum can corrode at contact points, especially near the coast. Stainless steel fasteners and isolation washers stop the problem, but only if installed before the corrosion spreads.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Full ActiveYards fence installation in Los Angeles typically runs $4,130 to $10,620. That range reflects the size of the project: a 60-foot section with one gate lands at the lower end, while a full property perimeter with multiple gates, stair-stepped runs, or hard access lands higher. We give a written price before any work starts, and that number doesn’t change once the crew arrives unless you change the scope with us first.
Here’s what typically drives cost in the Los Angeles market:
- Linear footage: Material scales directly with fence length.
- Gate count and hardware: Each ActiveYards gate needs hinges, latch, and a reinforced gate frame. A double-drive gate is the single largest cost multiplier on most jobs.
- Post setting and access: If the crew can’t get a cart to the line, labor time increases. Steep hillsides in Silver Lake or Echo Park add staging time.
- Old fence removal: Tearing out and hauling a previous fence adds to the total, but we include removal in the written price so you’re never surprised.
Parts and labor are itemized separately on every proposal. The 365-Day Done Right Promise covers the completed installation: if something on our work isn’t right after the job is done, we make it right. The ActiveYards manufacturer warranty applies to the materials themselves, and we’ll give you the documentation to keep with your records.
DIY or Call Us?
Replacing an aluminum or vinyl fence section is not dangerous the way a garage-door spring is, but it does require more than a post-hole digger. The mistakes we get called in to fix most often are posts set too shallow for Los Angeles soil conditions, concrete mixed too wet, and gate hinges installed out of plumb so the latch never seats. If the post bases are sound and you’re only swapping pickets or panels, a careful homeowner with a level and a drill can manage it. If a post is leaning, cracking, or the gate is sagging, that’s where we’d step in. We’ll also note this: on any fence over six feet or on a hillside, the digging gets difficult fast, and a failed post could drop a section onto a neighbor’s yard.
The written scope is the promise – if it is not on the paper, we have not agreed to it yet. Call (949) 850-9896 and we’ll send someone to measure, identify your ActiveYards series, and leave you a written price. You decide from there.
FAQs
Expect 20 to 30 years from aluminum with proper post setting, and 15 to 25 years from vinyl depending on sun exposure and how carefully the clear coat is maintained. Coastal areas shorten the aluminum range slightly due to salt air. Call (949) 850-9896 and we can assess what’s realistic for your specific location.
In most cases a leaning section means one failed post, and that can be dug out and reset in a deeper, heavier concrete footing without touching the rest of the fence. We’ve saved Los Angeles homeowners thousands by doing exactly that. The exception is when multiple posts in a row have shifted, which usually points to a drainage or soil issue. Call (949) 850-9896 for a straight answer on which situation you have.
A typical single-section repair is a one-day job. A full perimeter ActiveYards installation across a standard Los Angeles lot runs three to five working days, including old fence removal, post setting, curing time, and final gate adjustment. We’ll give you the schedule in the written scope before work starts.
We carry ActiveYards-compatible posts, rails, pickets, and gate hardware on our trucks for the most common Los Angeles fence lines. Unusual series or custom gate sizes may need a short order window. Call (949) 850-9896 and we’ll confirm what we have for your model.
Written by Graham Stein, Owner at Elmstead Remodeling, serving Los Angeles and nearby areas. Graham grew up in Silver Lake and has been working on Los Angeles homes for nearly two decades, including fence lines, gates, kitchens, and baths where the details matter every morning.
