Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Kitchen Remodeling: The Los Angeles Owner’s Guide
Ameristar kitchen remodeling in Los Angeles typically runs $16,520 to $53,100 for a full kitchen, depending on cabinet layout, countertop material, and whether walls or plumbing move. We install Ameristar-compatible cabinets and hardware, and we keep common replacement hardware and touch-up materials on the truck so a failing hinge, drawer slide, or cabinet face doesn’t stall your kitchen for weeks. Most Los Angeles homeowners discover an Ameristar kitchen part has failed when a drawer starts grinding, a cabinet door won’t stay closed, or a hinge pin has worn through after years of daily use.
If you’re reading this, you probably have an Ameristar cabinet or hardware piece that’s no longer doing its job. Maybe a soft-close mechanism stopped catching. Maybe a drawer box separated at the corner. Maybe the finish on a door panel is peeling near the dishwasher. This page tells you what’s fixable, what’s replaceable, and what the honest installed price should look like in Los Angeles.
Which Ameristar Models This Applies To
Ameristar cabinetry runs through several series lines, and the hardware specs change between them. The important compatibility gotcha: Ameristar cabinet boxes are built on two different hinge boring patterns depending on the series. Older Ameristar lines use a 35mm cup bore with a 9mm offset; the newer Value Plus and Select series shifted to a 48mm mounting plate spacing. If you order the wrong hinge, it will not seat flush no matter how carefully you hang the door. Before replacing anything, open a cabinet door and look for a small sticker inside the cabinet box or on the underside of a drawer. The series name and sometimes the build date are printed there. If the sticker is gone, measure the hinge cup diameter with a caliper. That measurement tells us which hardware family we’re ordering from.
We install both OEM Ameristar parts and quality aftermarket equivalents when they match spec. For high-wear items like soft-close dampers and drawer slides, we stock aftermarket hardware from Blum and Salice that often outlasts the original Ameristar part. For visible pieces like door fronts and decorative end panels, we recommend OEM so the finish profile matches the adjacent cabinets. KraftMaid, Cambria, and Silestone are also names we work with regularly, but this page is specifically about keeping Ameristar kitchens functional.
Styles & brands we work with
Signs Your Ameristar Kitchen Remodeling Is Failing
- A drawer grinds or sticks about three-quarters closed. The ball-bearing slide has usually lost a bearing cage or picked up grease and grit. In Los Angeles, fine dust from open windows and Santa Ana winds works its way into slides faster than coastal owners expect.
- A cabinet door won’t stay closed or closes too hard. The soft-close damper inside the hinge cup has worn out. These are small hydraulic cartridges, and they fail predictably after about five to seven years of daily use.
- The door hangs crooked and rubs the frame. Hinge screws have stripped out of the particleboard cabinet side. This is a common Los Angeles failure in kitchens near the laundry or dishwasher where humidity cycles loosen the screw holes over time.
- The finish is peeling or bubbling on doors near the stove or dishwasher. Heat and steam degrade the thermofoil or painted finish faster than anywhere else. Once moisture gets under the laminate edge, the panel doesn’t recover.
- A drawer front has separated from the drawer box. Ameristar drawer boxes are joined with dowels and adhesive, and on older models the adhesive eventually shears. The drawer still works, but it’s pulling itself apart with every open.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Small-scale Ameristar hardware replacement in Los Angeles, like a full set of soft-close hinges or new drawer slides, typically falls between $945 and $2,950 installed. Replacing a few cabinet doors or drawer fronts lands in the $2,360 to $7,670 range, depending on panel size and finish matching. A full kitchen remodel on an Ameristar footprint runs $16,520 to $53,100, and that number moves based on whether you’re keeping the existing cabinet layout or changing it.
Every price we write includes the parts, the labor, the shoe covers and drop cloths, and a photo of the clean-up before the crew leaves. We give you a written price before any work starts, and it doesn’t change once the crew is inside your home. Graham Stein notes that The written scope is the promise: if it is not on the paper, we have not agreed to it yet. The 365-Day Done Right Promise covers the work after it’s done: if something isn’t right, we make it right at no additional cost.
DIY or Call Us?
Cabinet hinges and drawer slides are low-risk for a careful homeowner to replace, provided you match the bore pattern and mounting spacing before buying parts. What goes wrong in Los Angeles homes is usually the cabinet box itself: stripped hinge holes, swollen particleboard in the corner cabinet under the sink, or drawer boxes that have twisted out of square. Once the cabinet box is compromised, a new hinge won’t fix the real problem. The danger here isn’t injury, it’s damage: forcing a misaligned drawer closed can crack the drawer front and the cabinet frame behind it.
If you can measure the hinge cup diameter and count the mounting holes, we can often hand you the right part over the phone or bring it on the first visit. If the cabinet box itself has failed, we do the repair with the same care we’d use on a full remodel. Call (949) 850-9896 and tell us what’s failing. We’ll help you tell the difference over the phone, and we won’t sell you a replacement part that doesn’t match your Ameristar series.
FAQs
Most Ameristar soft-close hinges and drawer slides last five to seven years of daily use in Los Angeles homes, with a shorter lifespan near the dishwasher or under a window that catches afternoon sun. Dust, humidity swings, and how heavily the drawers are loaded all move that number.
Sometimes, yes. A stripped hinge screw hole can be drilled and plugged with a hardwood dowel, and a sagging drawer front can be re-squared and re-glued if the box is still sound. If the drawer box has separated at the corners or the hinge damper is blown, replacement is the honest fix. Call (949) 850-9896 and we’ll walk through what you’re seeing before you buy anything.
A full set of hinges or drawer slides usually takes half a day. Replacing door fronts or drawer panels can take two to three visits because of finish matching and order lead time. We tell you the timeline in writing before the work starts.
We keep the most common Ameristar-compatible hinges, slides, and dampers on the truck in Los Angeles, and we order series-specific parts with a short lead time when the match isn’t in stock. If you’re not sure which series you have, text us a photo of the cabinet sticker and we’ll identify it before we arrive.
Written by Graham Stein, Owner, Elmstead Remodeling at Elmstead Remodeling, serving Los Angeles and nearby areas.
