Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Kitchen Remodeling: The Los Angeles Owner’s Guide
If you have a Barrette kitchen component that has failed or is wearing out, we can source the matching replacement and install it for $16,520 to $53,100 depending on the scope, with the written price confirmed before any work begins. Most homeowners discover the problem the way you did: a hinge that no longer holds, a slide that grinds, a finished surface that has dulled or chipped in a spot that gets daily use. We stock common Barrette-compatible hardware on our trucks and can order model-specific pieces directly, so you are not stuck living with a half-working kitchen while a part sits in backorder.
Which Barrette Models This Applies To
Barrette kitchen lines vary by build year, and the hardware specs changed across series, so the first step is always identifying what you actually have. Look for a small label or stamp inside the cabinet door or on the underside of a drawer box: the model or series code, usually a letter followed by four to six digits, tells us which hinge pattern, slide length, and mounting plate your piece was built around. We have pulled labels off cabinets in Silver Lake and Mid-Wilshire that were printed in the early 2000s and still legible, and that code saved the homeowner a week of guesswork.
For Barrette specifically, the two most common compatibility gotchas we see in Los Angeles homes are hinge overlay (the distance the door overlaps the frame, typically 1/2 inch or 1-1/4 inch on older Barrette builds) and drawer slide length, which was not standardized across their mid-range lines. If you buy a slide that is an inch too long, it will not mount even though it looks identical. We measure before ordering, every time. As for OEM versus aftermarket: Barrette OEM hardware holds its finish longer, but quality aftermarket slides from Blum or Salice often outperform the original slides on mid-2000s Barrette boxes, and they cost about the same. Graham Stein has had good results recommending that swap when the original hardware was clearly the weak point.
Elmstead Remodeling is an independent contractor in Los Angeles and is not affiliated with Barrette. We work with their products because homeowners ask us to, and we also stock parts for KraftMaid, Cambria, and Silestone when a job calls for it.
Styles & brands we work with
Signs Your Barrette Kitchen Remodeling Is Failing
- A drawer or door sags when open. The hinge or slide has worn past its adjustment range, and tightening the screws no longer pulls it square. This is the earliest warning sign, and it only gets worse as the mounting holes wallow out.
- You hear a grind or feel resistance when opening a drawer. Ball bearings in the slide have flattened or the nylon rollers have cracked, common in kitchens near the coast where salt air accelerates metal fatigue. Los Angeles kitchens within a few miles of the water see this a year or two sooner than inland homes do.
- A door will not stay closed. The catch or soft-close mechanism has failed. On Barrette builds from the mid-2010s, the soft-close piston was often the first component to go, and it is replaceable on its own.
- The finish on a frequently touched surface has worn through. Around the dishwasher, the sink base, or a trash pull-out, moisture and heat break down the clear coat faster than anywhere else. Once the topcoat is gone, the substrate absorbs water and swells.
- A hinge screw keeps spinning without biting. The hole in the cabinet box has stripped. This is repairable with a drilled-and-glued hardwood plug, and we do that fix regularly rather than telling a homeowner to replace the cabinet.
Replacement Cost & What’s Included
In Los Angeles, a hardware-focused Barrette repair (hinges, slides, catches on a few cabinets) typically runs $945 to $2,950 installed. A full cabinet re-box or replacement using Barrette-compatible lines lands between $10,620 and $23,600, and a complete kitchen remodel with Barrette cabinetry, countertops, and installation ranges from $16,520 to $53,100 depending on kitchen size, layout changes, and surface choices. Those numbers include the written price before we start, the parts, the labor, shoe covers and drop cloths on every visit, and a photo of the clean-up before the crew leaves.
- Cabinet installation: $4,720 – $15,340
- Countertop installation: $2,360 – $7,670
- Backsplash installation: $945 – $2,950
- Small kitchen remodel: $10,620 – $23,600
- Full kitchen remodel (this page’s core range): $16,520 – $53,100
Every line is our written promise, not a starting point. The 365-Day Done Right Promise covers the completed work: if it is not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
There are two things you can safely check yourself before calling. First, tighten the mounting screws on a sagging hinge or slide by hand with a screwdriver. Second, look for the model label so you can tell us the series code. Neither requires special tools or puts anyone at risk.
What you should not attempt on your own is drilling out stripped hinge holes, cutting new mounting plates, or installing soft-close mechanisms on Barrette boxes that were not built for them. Those jobs go wrong fast, and a misaligned drill hole in a cabinet face is harder to repair than a worn hinge. If the part involves cabinet-box structural repair or anything requiring a saw, a template, or a level, call (949) 850-9896 and we will schedule a look. The written scope is the promise – if it is not on the paper, we have not agreed to it yet.
FAQs
Most Barrette hinges and slides in Los Angeles last 12 to 18 years, with the shorter end applying to homes within a few miles of the coast where salt air wears metal components faster. Call (949) 850-9896 if you are noticing early wear, and we will tell you whether it is worth repairing now or waiting.
Depending on the part, a repair is often possible: hinges can be adjusted, stripped screw holes can be plugged with hardwood and re-drilled, and soft-close pistons can be swapped individually. If the slide or hinge is physically cracked or the cabinet box has delaminated, replacement is the honest call, and we will show you the old part so you can see why.
A simple hardware swap on a few cabinets is usually done in one visit, typically two to four hours including testing every door and drawer. A larger scope involving countertops or full cabinet installation follows the schedule we put in your written price, and we respect quiet hours during children’s sleep times where possible.
We keep common Barrette-compatible hinges, slides, catches, and soft-close pistons on our trucks in Los Angeles, so many repairs are same-visit. Model-specific pieces for older or specialty Barrette series are ordered directly, and we give you the lead time in the written scope before any work begins.
Get a Written Price on Your Barrette Kitchen Part in Los Angeles
If a drawer is grinding, a door will not stay closed, or a finish has worn through near the dishwasher, call us at (949) 850-9896. A live person answers, and we will walk through what you are seeing, help you find the model code, and schedule a time for us to measure and confirm the fix. You get the written price before any work starts, and the crew leaves with the floors covered and a photo of the clean-up. That is the Cedarwell Care Promise, and it applies to every Los Angeles job we do.
Written by Graham Stein, Owner, Elmstead Remodeling at Elmstead Remodeling, serving Los Angeles and nearby areas.
