Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Los Angeles Homeowners Choose Mr-Glass Construction
Elmstead Remodeling provides independent Mr Glass repair in Los Angeles for shower enclosures and glass systems, including installation, repair, and replacement. We are not affiliated with or authorized by Mr-Glass, which means our recommendations are based on what your actual glass and framing need, not what a manufacturer wants us to sell. Our crews carry factory-spec hinge, seal, and hardware kits on every truck, and we have been working on Mr-Glass enclosures in Los Angeles bathrooms for over a decade. If you need a sagging pivot door re-hung, cracked rollers replaced, or a full tub-to-shower conversion using Mr-Glass components, call (949) 850-9896 for a written price before any work starts.
What makes our Mr-Glass work different is the same thing that defines every Elmstead Remodeling project: we tell you the exact price in writing before the first tool comes out, we protect your floors with drop cloths and our crew wears shoe covers at the door, and we send you a photo of the clean-up before we leave. That is not an add-on. It is the Cedarwell Care Promise, and it governs every Mr-Glass enclosure we touch in Los Angeles.
Why Trust Elmstead Remodeling for Your Mr-Glass Construction?
Mr-Glass enclosures live or die on the quality of the hardware installation. A frameless pivot door that is hung even a degree out of square will sag within a year. A sliding door with rollers that do not match the original track extrusion will jump the rail and chip the glass. These are the things we check on every Mr-Glass service call because we have seen the failure modes repeat across hundreds of Los Angeles bathrooms.
Our technicians know the Mr-Glass product families: the frameless sliding kits in barn-door and roller styles, the pivot-hinge frameless and semi-frameless doors, the Neo-Angle and Neo-Round corner enclosures, and the glass shelving and mirror lines. When a Mr-Glass pivot hinge loosens at the wall jamb in a 1960s Koreatown apartment or a 1920s Silver Lake bungalow, the problem is rarely the hinge itself. It is the wall blocking behind it. Los Angeles homes from those eras often have plaster over wood lath or thin drywall, and the original installer may not have set proper blocking behind the jamb. We rebuild that blocking, set new OEM-spec pivot hardware, and re-hang the door square to the curb.
Graham Stein, Owner at Elmstead Remodeling, grew up in Silver Lake and has been working on homes across Los Angeles for going on two decades. He learned framing, finish work, and project sequencing at Los Angeles Trade-Technical College on South Grand Avenue, where instructors expected you to read a set of plans before you picked up a tool. The written scope is the promise – if it is not on the paper, we have not agreed to it yet. That applies to a Mr-Glass roller replacement the same way it applies to a full kitchen remodel.
Styles & brands we work with
Common Mr-Glass Construction Problems We Fix in Los Angeles
These are the five issues we see most often on Mr-Glass enclosures in Los Angeles homes, and they are the reason our trucks carry the hardware kits they do.
- Worn lower rollers on Mr-Glass frameless sliding doors. The roller assemblies on the barn-door and roller-style sliding kits wear flat over time, especially in bathrooms where hard water mineral deposits build up on the bottom track. Once a roller is flat, the door starts jumping the track or dragging on the sill. We replace the rollers with OEM-equivalent assemblies that match the original extrusion profile, so the door rolls cleanly without grinding.
- Sagging pivot hinges on Mr-Glass frameless pivot doors. When the top pivot loosens at the wall jamb, the entire door drops. The magnetic strike or side seal gaps, and water ends up on the bathroom floor every time someone showers. The real cause is usually worn or missing jamb blocking, not the hinge itself. We pull the panel, rebuild the blocking, install new pivot hardware to factory spec, and re-hang the door so it closes with one finger.
- Hardened and cracked bottom and side sweeps. Mr-Glass factory sweeps are clear vinyl, and after three to five years of Los Angeles hard water and UV exposure, they yellow, harden, and eventually crack. When the sweep cracks, water wicks underneath the door. This is one of the cheapest Mr-Glass fixes we do, and one of the most common reasons people think they need a whole new enclosure when they only need a sweep kit.
- Edge chips at towel-bar and handle cutouts. The cutouts for towel bars and handles on Mr-Glass panels are stress points. If the door gets swung hard or the hardware gets bumped, the edge can chip. A chip at the edge will propagate into a full panel crack if the door keeps being used. We always flag this during diagnosis because it changes the repair math from a hardware fix to a panel replacement.
- Water leaking at the bottom corner despite a good-looking seal. This is almost always an out-of-square condition, not a seal problem. In older Los Angeles homes, shower curbs settle, walls shift, and the original enclosure may have been installed to a wall that was never square. The seal looks fine because the door is no longer aligned with the curb. We check the geometry first, then decide whether a re-hang fixes it or whether the panel needs to be re-cut or replaced.
Mr-Glass Parts & Our Repair-vs-Replace Approach
We stock OEM-equivalent Mr-Glass roller, pivot, and seal kits that match the original extrusion profiles, so replacement hardware fits the existing track and jamb geometry without modification. For discontinued Mr-Glass panels or custom-size enclosures where the original hardware is no longer available, we machine quality aftermarket stainless hardware rather than forcing an oversize OEM part into a space it was never designed for.
The honest repair-versus-replace call comes down to the glass. If the panel itself is chipped at the edge, out of square, or showing stress fractures at the hardware cutouts, replacing the hardware will not fix the real problem. We will tell you when a re-hang or a hardware swap makes sense, and we will tell you when it does not. We would rather replace a panel once than re-hang the same failing door twice and charge you for both visits. Call (949) 850-9896 if you want an honest assessment of your Mr-Glass enclosure before you spend money on parts.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. We measure the door against the curb and the jamb, check the roller and pivot hardware for wear, inspect the sweeps and seals, and look for edge chips or stress fractures at the cutouts. This tells us whether the issue is a part, a re-hang, or a full panel replacement.
- 2
Written scope and price. Before any work starts, you get a written price that names the exact parts, the exact work, and the exact timeline. If something is not on the paper, we have not agreed to it yet.
- 3
Repair or installation. We protect your bathroom floor with drop cloths, wear shoe covers at the door, and keep tools quiet during family rest hours where possible. For a typical Mr-Glass roller or sweep replacement, we are finished the same visit. For a full enclosure install or tub-to-shower conversion, we schedule the work in clear phases so you know what is happening each day.
- 4
Spray test and clean-up. Every Mr-Glass door we touch gets a spray test before we leave. No floor water, no call-back. We photograph the clean-up and send it to you, then walk you through what we did and what to watch for.
- 5
365-Day Done Right Promise. Every project is covered. If something is not done right, we make it right. That promise applies to a $200 sweep replacement the same way it applies to a ol4,000 walk-in shower installation.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Products We Service & Install in Los Angeles
We service and install the full Mr-Glass residential product range across Los Angeles. That includes the frameless sliding shower door kits in barn-door and roller styles, the pivot-hinge frameless and semi-frameless shower doors, the Neo-Angle and Neo-Round corner enclosures, and the glass shelving, mirror, and table-top glass lines. We keep OEM-equivalent roller, pivot, and seal kits on our trucks for same-visit fixes on the most common Mr-Glass models, and we can source or machine hardware for discontinued and custom-size panels when the factory part is no longer available.
Los Angeles has a specific problem Mr-Glass owners should know about: many of the bathrooms we service are in pre-1980 homes with walls that are no longer square. A Mr-Glass Neo-Angle enclosure in a 1920s Los Feliz Spanish Colonial or a 1950s Sherman Oaks ranch often needs custom panel sizing because the corner walls have moved over decades, and we also handle Mr Glass service in Glendale for similar vintage homes. We measure to the actual wall, not to the nominal size, and we adjust the panel spec before we order or cut anything.
We Also Service These Brands
Elmstead Remodeling works across the full range of modern remodeling materials, so we can coordinate a Mr-Glass shower enclosure with the rest of your bathroom or kitchen project without forcing you to juggle multiple contractors. We install KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures. One crew, one written price, one 365-Day Done Right Promise covering the whole job.
FAQs – Mr-Glass Construction Service in Los Angeles
No. We are an independent trade contractor and we are not affiliated with, authorized by, or endorsed by Mr-Glass. We service Mr-Glass products because Los Angeles homeowners own a lot of them and because we know the hardware and failure modes well. Our independence means our recommendation is based on what your enclosure actually needs. Call (949) 850-9896 if you want an unbiased read on your Mr-Glass door.
Usually, yes. We keep OEM-equivalent roller kits that match the original Mr-Glass extrusion profiles, and for truly discontinued items we source or machine quality aftermarket stainless hardware. The key is matching the roller to the track geometry, not just the brand name. Bring us a photo of the door and the track, or call (949) 850-9896 and we will help you identify what you have before you spend money on the wrong part.
That is almost always an out-of-square condition. The door has sagged or the curb has settled, so the panel no longer sits flat against the curb even though the sweep looks intact. The fix is a re-hang, not a new seal. We measure the door against the curb, rebuild the jamb blocking if needed, reset the pivot hardware, and re-hang the panel square. Call (949) 850-9896 and we will tell you whether it is a re-hang or a panel replacement after we measure it.
For a standard Mr-Glass frameless sliding or pivot door in a bathroom that is already square, installation is typically one day. A full Neo-Angle or custom corner enclosure with out-of-square walls, new framing or blocking, and multiple glass panels usually runs two to three days. Tub-to-shower conversions add time for demo, waterproofing, and tile. We give you a written timeline in the scope before work starts, and the 365-Day Done Right Promise covers the finished job. Call (949) 850-9896 for a specific timeline on your project.
Mr-Glass offers a range of standard sizes, and some series include adjustable or custom-cut options. When the walls are far enough out of square that a stock panel will not seat properly, we work with custom glass fabrication to match the actual wall geometry. In our experience across Los Angeles and Long Beach Mr Glass service areas, pre-1980 bathrooms frequently need this. Call (949) 850-9896 and we will measure your corner and tell you whether a stock Mr-Glass panel will work or whether you need a custom cut.
Mr-Glass warranties typically cover manufacturing defects in the glass and hardware, and any service by an independent contractor can affect the warranty depending on the specific terms. We use OEM-equivalent parts, we follow factory installation geometry, and we document what we did. That is the most warranty-safe way to service a Mr-Glass enclosure outside an authorized channel. We will also tell you plainly if we think a repair is likely to raise warranty questions before we touch anything. Call (949) 850-9896 to talk it through.
Anaheim Mr Glass service costs and those throughout Los Angeles depend on whether you need a part, a re-hang, or a full enclosure installation. Here are the project types we handle most often.
| Project | Los Angeles Price Range |
|---|---|
| Walk-In Shower Installation | $5,310 – $14,160 |
| Tub-to-Shower Conversion | $4,130 – $11,800 |
| Shower Replacement | $3,540 – $10,030 |
| Bathroom Vanity Installation | $945 – $3,540 |
Every quote is a written price before any work starts, with no estimates that grow after the crew arrives. Call (949) 850-9896 for an exact quote on your Mr-Glass project – estimates are free.
Book Your Mr-Glass Service in Los Angeles, CA
If your Mr-Glass shower door is sagging, leaking, or dragging on the track, we will tell you honestly whether you need a part, a re-hang, or a full replacement. You get a written price before any work starts, shoe covers and drop cloths on every visit, and a photo of the clean-up before we leave. Call (949) 850-9896 to schedule your free estimate.
Written by Graham Stein, Owner at Elmstead Remodeling, serving Los Angeles since 2005.
