Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Los Angeles Homeowners Choose PGT Construction
We provide independent PGT window and door service across Los Angeles, from full kitchen remodels that incorporate new PGT sliders to PGT repair in Los Angeles on existing impact-rated units. What separates our PGT work from a typical replacement job is that we see these products from both sides: we install new PGT units and we pull out old ones when a wall gets opened for a remodel, so we know how they actually behave after ten or fifteen years in an LA opening. We are not an authorized PGT dealer or installer. We are the Los Angeles remodeling contractor homeowners call when a PGT product needs to integrate with a new kitchen, bathroom, or roofing scope, and the wall cavity has to be left watertight before we close it back up. Call us at (949) 850-9896 to talk through your project and get a written price before any work starts.
Elmstead Remodeling has been working on homes across Los Angeles since 2005, and Graham Stein, our owner, learned the fundamentals of framing, finish work, and project sequencing at Los Angeles Trade-Technical College on South Grand Avenue before going on to specialize in exactly the kind of kitchen and bath work where a window rough opening and a tile line have to agree with each other. We also provide PGT service in Glendale. That matters when the product in the opening is a PGT impact window or slider.
Why Trust Elmstead Remodeling for Your PGT Construction?
The short version: our crews open walls for a living. A PGT window or slider is only as good as the rough opening it sits in, and the framers and finishers on our kitchen and bath teams see the failure points most installers never look at again after the trim goes on. When Graham Stein was still running jobs as lead carpenter, he made a habit of re-checking sill flashing on every opening before drywall went up. That habit has stayed with the crew. If we are tying a PGT unit into a full remodel, the flashing, pan, and sealant details get inspected and photographed before anything gets covered.
We also do not hide behind a brand name when something is wrong. If a PGT unit is worth saving, we save it with OEM PGT replacement hardware, gaskets, and glazing components. If the frame is already compromised at the rough opening, we say so and give you a replacement number as part of the larger remodel. The written scope is the promise – if it is not on the paper, we have not agreed to it yet.
Key Takeaways
- We are an independent PGT service provider in Los Angeles, not an authorized dealer.
- We install and service PGT WinGuard aluminum impact windows and doors, PGT vinyl EnergyVue series, and PGT sliding glass door packages.
- Every project gets a written price before work starts, shoe covers and drop cloths on site, and a photo of the clean-up before the crew leaves.
- The 365-Day Done Right Promise covers every completed project. If it is not done right, we make it right.
- Free estimates: call (949) 850-9896.
Styles & brands we work with
Common PGT Construction Problems We Fix in Los Angeles
These are the issues we actually find when we open a wall or a client reports a problem on an existing PGT unit. We are naming them specifically because most online PGT content repeats the same brochure language. This is what failure looks like on the ground in Los Angeles, and we handle PGT service in Long Beach too.
- Failed thermal breaks on WinGuard aluminum impact frames. The aluminum frame’s thermal break or frame seal fails around the opening perimeter, letting water track into the wall cavity during rainy weeks and leaving dark stains on the interior sill. We see this most often on west- and south-facing units in neighborhoods like Sherman Oaks and Tarzana where UV exposure is relentless. When a kitchen remodel opens that wall, we replace the unit and correct the opening rather than patching a seal that will fail again.
- Rotted sill pans and sheathing from sealant-only flashing details. Many original PGT window and door installations across Los Angeles relied on sealant at the rough opening instead of proper pan flashing. Ten years later, the sealant has dried and pulled away, and water has followed the fasteners into the sill. In a 1950s ranch in the Valley, our crew opened a kitchen wall and found exactly this on a set of PGT aluminum sliders: rotted sill pan, failed thermal breaks, and water that had been quietly running behind the stucco for years. We re-flashed the rough opening, set a new PGT sliding unit with a correct pan, and closed the wall so the finished kitchen was not hiding a leak.
- Fogged glass and failed edge seals on impact glazing packages. PGT impact windows use laminated glass with an interlayer, and when the edge seal fails, that interlayer eventually shows mineral fog or water spots between the panes. In Los Angeles, the hot-dry-then-rain cycle of late summer into winter accelerates this. If the frame is still square and dry, replacing the glazing unit is often possible. If the fog has been there for two or more seasons, the frame usually needs to be evaluated too.
- Dragging or leaking rollers on PGT sliding glass doors. The roller hardware on PGT sliders wears out, especially where the unit was set near a finished floor transition and grit from the floor finds its way into the track. The door starts to drag, then the track fills with debris, and water pools at the threshold. We replace rollers with OEM PGT hardware when the unit is worth saving, and we check the track slope while we are in there.
- Water intrusion at PGT roof and vent flashings during whole-home work. When we are doing a roof repair or a fullhome remodel that includes PGT skylight or roof-window flashings, the failure is almost always at the flashing interface, not the glass. In Los Angeles, where roofs go years between rains, a slow flashing leak can do a lot of hidden damage before anyone sees a stain on the ceiling. We address it as part of the larger scope, not as a separate surprise add-on. That is how the written price works: the flashing detail is on the paper.
PGT Parts & Our Repair-vs-Replace Approach
For PGT units that are structurally sound, we use OEM PGT replacement hardware, gaskets, and glazing components. That means rollers, locks, strike plates, and weather stripping come from PGT’s parts lines wherever the manufacturer makes a proprietary part. For non-proprietary items like flashing, pan material, and sealant, we spec quality aftermarket products chosen for Los Angeles’s specific exposure conditions, not whatever is cheapest on the shelf. We stock common PGT roller sets, gaskets, and hardware locally so a repair does not sit waiting on a backorder from Florida.
Our repair-versus-replace decision is honest and usually takes ten minutes on site. If the frame is square, not corroded through, and the wall cavity is dry, we repair. If the frame is twisted, the sill pan is gone, or water has been intruding long enough to damage structural framing, replacing the unit as part of the larger remodel is almost always cheaper than a patch that fails again two years later. Call (949) 850-9896 and we will tell you which one you are looking at.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We schedule a site visit, inspect the PGT unit and the wall cavity around it, and test for air and water infiltration where the project allows. If walls are already open, we photograph the flashing and pan details before anything is disturbed.
- 2
Written scope and price. We send a written price covering the PGT work and any related flashing, framing, or finish scope. The number on the paper is the number we work to. If we open the wall and find something additional, that becomes a written change order, not a surprise at the end.
- 3
Repair or installation. The crew sets the PGT unit with correct pan flashing and sealant details, or replaces the hardware and glazing on an existing unit, using OEM PGT parts where applicable. Shoe covers on the floor, drop cloths in the work area, and quiet tools during children’s sleep hours where possible.
- 4
Testing and clean-up. We test operation of the new or repaired unit, check water management at the opening, photograph the clean-up before we leave, and walk you through what was done and what the warranty covers.
- 5
The 365-Day Done Right Promise. If something on the completed project is not right within the first year, we make it right. That includes the PGT work we touched.
PGT Products We Service & Install in Los Angeles
We work on the PGT product lines most common in Los Angeles homes: WinGuard aluminum impact windows and doors, PGT aluminum sliding glass doors, and the PGT EnergyVue vinyl replacement series. We also service storm-rated WinGuard door and window packages on homes in the Wildland-Urban Interface zones, where CAL FIRE and LA County standards require specific glazing and frame characteristics. We keep common OEM rollers, gaskets, and hardware sets in stock for faster turnaround on repair work, and we order full units directly through our supply channels when a replacement is part of a larger kitchen, bathroom, or whole-home remodel.
See the difference
Before
After
Before
After
Before
AfterWe Also Service These Brands
PGT knowledge lives inside a larger remodeling practice. Elmstead Remodeling is not a single-brand shop. We install and integrate cabinets from KraftMaid, countertops from Cambria and Silestone, and fixtures from Kohler alongside PGT window and door work, so a kitchen or bathroom remodel never splits into competing contractors. Named brands with manufacturer warranties, no exceptions.
How Much Does PGT Construction Cost in Los Angeles?
PGT-specific work rarely happens in isolation. It is usually scoped as part of a kitchen, bath, roof, or whole-home remodel, which is why we price it within the larger project rather than as a bare line item that misleads you. Here are the market-calibrated ranges we work within for typical PGT-integrated scopes in Los Angeles:
| Scope | Typical Los Angeles Range |
|---|---|
| Full Kitchen Remodel (with PGT door or window integration) | $16,520 – $53,100 |
| Full Bathroom Remodel (including PGT window or glass integration) | $10,620 – $33,040 |
| Frameless Glass Shower Enclosure | $3,540 – $10,030 |
| Roof Repair (including flashing around PGT roof and vent penetrations) | $470 – $2,125 |
Every project gets a written price before any work starts. No estimates that grow after the crew arrives. Call (949) 850-9896 for an exact quote on your scope.
FAQs – PGT Construction Service in Los Angeles
Yes. That is the most common way we encounter PGT units in Los Angeles. When a kitchen wall is opened for a full remodel, we inspect the existing PGT window or door at the rough opening, repair or replace it as needed, and close the wall with correct flashing details so the finished kitchen is not hiding a leak. Call (949) 850-9896 to schedule an evaluation.
We use OEM PGT replacement hardware, gaskets, and glazing components when the unit is structurally sound and PGT makes the proprietary part. For non-proprietary items like flashing, pan, and sealant, we select quality aftermarket materials appropriate to Los Angeles’s exposure conditions. If the frame is compromised, we may recommend replacement and explain why.
In our experience in Los Angeles, water intrusion around a PGT window or door is usually a flashing problem at the rough opening, not a failure in the glass itself. Sealant-only installations degrade over years of sun and rain cycles, and water follows the fasteners into the sill. We diagnose both the glass and the opening before recommending repair or replacement. Call (949) 850-9896 and we will inspect it.
Yes. We coordinate new bathroom tile, Kohler fixtures, and bath glass with the existing PGT window or door profile so the finished wall plane, the window return, and the fixture layout all line up. The tile should die cleanly into the PGT frame, not chase around it. This is one of the details Graham Stein is particular about, because it is the one you look at every morning.
Yes. We install and integrate PGT WinGuard impact windows and doors throughout a whole-home remodel, including units in Wildland-Urban Interface zones where Class-A roofing and ember-resistant vent standards apply. The PGT work is scoped within the written price, never as a separate surprise after walls are open.
Anaheim PGT service is also available, and PGT window and door work is typically bundled with larger scopes. A full kitchen remodel with PGT integration runs $16,520 to $53,100, a full bathroom remodel including PGT window or glass work runs $10,620 to $33,040, and a roof repair covering flashing around PGT penetrations runs $470 to $2,125 in Los Angeles. Exact pricing depends on the condition of the rough opening and the specific PGT line. Call (949) 850-9896 for a written quote, free of charge.
Book Your PGT Service in Los Angeles, CA
If your PGT window or door needs repair, replacement, or integration into a remodel in Los Angeles, call (949) 850-9896 for a free estimate and a written price before any work starts. Our team answers live, 24/7.
Written by Graham Stein, Owner at Elmstead Remodeling, serving Los Angeles since 2005.
